Supermicro AS-1020P-8R, User Manual

Page: 40 / 104

5-6
AS1020P-T(R)/1020P-8(R) User's Manual
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See Figure
5-3 for the pin locations of the various front control panel buttons and LED indica-
tors. Please note that even and odd numbered pins are on opposite sides of each
header.
All JF1 wires have been bundled into single ribbon cable to simplify their connection.
Make sure the red wire plugs into pin 1 as marked on the board. The other end
connects to the Control Panel printed circuit board, located just behind the system
status LEDs in the chassis.
See the Connector Defi nitions section in this chapter for details and pin descrip-
tions of JF1.
Figure 5-3. JF1: Front Control Panel Headers
NMI
x (key)
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
UID
Power Button
Ground
x (key)
Power LED
HDD LED
NIC1
NIC2
OH/Fan Fail LED
Power Fail LED
Ground
Ground
2 1
20 19
JF1