Supermicro 6028R-WTR, User Manual

Page: 54 / 124

5-8
SUPERSERVER
6028R-WTR(T) USER'S MANUAL
Installing a Passive CPU Heatsink
1. Do not apply any thermal grease to the two heatsinks or the CPU die -- the
required amount has already been applied.
2. Place the heatsink on top of the CPU so that the four mounting holes
are aligned with those on the Motherboard's and the Heatsink Bracket
underneath. Install the SNK-P0048PSC heatsink in the CPU1 location (cut
out facing to the rear), and install the SNK-P0048PS heatsink in the CPU2
location.
3. Screw in two diagonal screws (i.e., the #1 and the #2 screws) until just snug
(-do not over-tighten the screws to avoid possible damage to the CPU.)
4. Finish the installation by fully tightening all four screws.
OPEN 1st
Motherboard
Screw#1
Screw#2
Mounting
Holes
Screw#3
Screw#4