Supermicro 6028R-WTR, User Manual

Page: 104 / 124

7-18
SUPERSERVER
6028R-WTR(T) USER'S MANUAL
SOL (Serial_Over_LAN) Device Mode
Use this feature to select the desired mode for the SOL port. The options are
Normal and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL
(Serial_On_LAN), and COM.
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.

Serial Port Console Redirection
These submenus allow the user to confi gure the following Console Redirection
settings for a COM Port 1 or COM Port 2 as specifi ed by the user.
COM 1/SOL (Serial-Over-LAN)
COM1/SOL Console Redirection
Select Enabled to use COM Port1 or SOL Port for Console Redirection. The options
are Enabled and Disabled. If this feature is set to enabled, the following items will
display.

Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for
Console Redirection. Select VT100 to use the ASCII character set. Select
VT100+ to add color and function key support. Select ANSI to use the extended
ASCII character set. Select VT-UTF8 to use UTF8 encoding to map Unicode
characters into one or more bytes. The options are VT100, VT100+ , VT-UTF8,
and ANSI.
Bits Per Second
This item sets the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy
lines. The options are 9600, 19200, 38400, 57600, and 115200 (bits per second).