Supermicro 5025M-4, User Manual

Page: 51 / 120

Chapter 5: Advanced Motherboard Setup
5-15
Wake-On-LAN
The Wake-On-LAN header is desig-
nated WOL on the motherboard. See
the table on the right for pin defi ni-
tions. You must also have a LAN card
with a Wake-On-LAN connector and
cable to use this feature.
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. See the board layout for
the location of JL1 and the table on
the right for pin defi nitions.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# Defi nition
1 Intrusion Input
2 Ground
Wake-On-LAN
Pin Defi nitions (WOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
LAN (Ethernet Port)
Two Ethernet ports (designated JLAN1
and JLAN2) are located beside the COM
port on the I/O backplane. These ports
accept RJ45 type cables.
Wake-On-Ring
The Wake-On-Ring header is designated
JWOR. This function allows your computer
to receive and be "awakened" by an incom-
ing call when in the suspend state. See the
table on the right for pin defi nitions. You
must also have a WOR card and cable to
use this feature.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up