Supermicro 4048B-TR4FT, User Manual

Page: 106 / 136

7-14
SUPERSERVER 4048B-TR4FT USER'S MANUAL
Legacy VGA Socket
Enter the VGA socket number (from 0-7) that will be used to support legacy
VGA. The default setting is
0 .

QPI Per Socket Configuration

CPU 0/CPU 1/CPU 2/CPU 3
Bus Resource Allocation Ratio
Use this feature to set the bus resource-allocation ratio (from 0-8). The default
setting is
1 .
IO Resource Allocation Ratio
Use this feature to set the IO resource-allocation ratio (from 0-8). The default
setting is
1 .
MMIOL Resource Allocation Ratio
Use this feature to set the Memory-Mapped IO resource-allocation ratio (from
0-8). The default setting is
1 .
IIO UniPhy Disable
Select Yes to hide the entire UNIFY in L2 cache. The options are No and Yes.

Memory Configuration
This section displays the following Integrated Memory Controller (IMC) informa-
tion.
DDR Speed
Use this feature to force a DDR3 memory module to run at a frequency other
than what is specified in the specification. The options are Auto , 1067, 1333,
1600, 1867, and 2133.
DDR Voltage Level
Select Force to 1.50V to force all DDR memory modules to operate at 1.50V.
Select Force to 1.35V to force all DDR memory modules to operate at 1.35V.
The options are
Auto , Force to 1.50V, and Force to 1.35V.
Advanced Clk (Clock) Training
Select Enable for Advanced Clock Training support, which will allow the memory
command line to synchronize with the clock line to enhance memory perfor-
mance. The options are
Enable and Disable.