Supermicro 2042G-72RF4, User Manual

Page: 98 / 112

7-10
A+ SERVER 2042G-72RF4 USER'S MANUAL
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. Select a value
to set the PCI latency in PCI clock cycles. Options are 32,
64 , 96, 128, 160,
192, 224 and 248.
PCI IDE Busmaster
Use this setting to
Enable
or Disable BIOS enabled uses of PCI Busmastering
for reading or writing to IDE drives.
SR-IOV Supported
Use this setting to Enable or Disable SR-IOV on your system.
ROM Scan Ordering
This setting determines which kind of option ROM activates prior to another.
Options include
Onboard First or Addon First.
Slot 1 ~ Slot 4 PCI-E Option ROM
These four settings (Slot 1 through Slot 4) allow you to enable or disable the
numbered slot's Op ROM, except for the VGA card.
Onboard LSI SAS Option ROM
This setting allows you to
Enable
or Disable the onboard LSI SAS option ROM.
Load Onboard LAN 1~4 Option ROM
This setting allows you to enable or disable the Load Onboard LAN ROM for LAN
1 through 4. LAN 1 is
Enabled , LAN 2~4 is Disabled by default.
Onboard LAN Option ROM Select
This setting allows you to select the onboard LAN option ROM for iSCSI or PXE .
Note : You must enable ONLY LAN1 when the iSCSI support option is specified.
Boots Graphic Adapter Priority
This option specifies the graphic adapter priority for Onboard VGA or Offboard
VGA .

SuperI/O Configuration
Serial 1 Address
This option specifies the base I/O port address and Interrupt Request address
of serial port 1. Select "Disabled" to prevent the serial port from accessing any
system resources. When this option is set to
Disabled
, the serial port physically