Supermicro 2042G-72RF4, User Manual

Page: 26 / 112

3-2
A+ SERVER 2042G-72RF4 User's Manual
3-3 Control Panel LEDs
There are five LEDs that provide status information about the system.
Power Fail
Indicates a power supply module has failed. This LED should be off when the
system is operating normally.
The second power supply module will take the load and keep the system running,
but the failed module must be replaced. Refer to Chapter 6 for details.
Power
The main power button is used to apply or remove power from the power supply
to the server system. Turning off system power with this button removes the main
power but keeps standby power supplied to the system.
Reset
Use the reset button to reboot the system.
3-2 Control Panel Buttons
There are two push-buttons located on the front of the chassis: a reset button and
a power on/off button.