Supermicro 2042G-72RF4, User Manual

Page: 15 / 112

Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your 2042G-72RF4 up and
running. Following these steps in the order given should enable you to have the
system operational within a minimum amount of time. This quick setup assumes
that your system has come to you with the processors and memory preinstalled. If
your system is not already fully integrated with a serverboard, processors, system
memory etc., please turn to the chapter or section noted in each step for details on
installing specific components.
2-2 Unpacking the System
Inspect the box in which the system was shipped and note if it was damaged. If the
server itself shows damage, file a damage claim with the carrier.
2-3 Preparing for Setup
The box the 2042G-72RF4 was shipped in should include two sets of rail assem-
blies, two rail mounting brackets and the mounting screws you will need to install
the system into the rack. Follow the steps to complete the installation in a minimum
amount of time. Please read this section in its entirety before you begin the instal-
lation procedure outlined in the sections that follow.
Choosing a Setup Location
Decide on a suitable location for the rack unit that will hold the 2042G-72RF4. It
should be situated in a clean, dust-free area that is well ventilated. Avoid areas
where heat, electrical noise and electromagnetic fields are generated. You will also
need it placed near a grounded power outlet. Be sure to read the Rack and Server
Precautions in the next section.