FRANÇAIS
ENGLISH
ESP
AÑOL
IMPORTANT SAFETY INSTRUCTIONS
14. ALWAYS CHECK AND MAKE SURE TO REMOVE ANY ADJUSTING KEYS
OR WRENCHES
before turning the tool on. Left attached, these parts can fly
off a rotating part and result in personal injury.
15. DO NOT USE THE COMPRESSOR IF IT CANNOT BE SWITCHED ON OR
OFF.
Have it repaired before using it.
16. DISCONNNECT THE PLUG FROM POWER BEFORE MAKING ANY AD-
JUSTMENTS.
Changing attachments or accessories can be dangerous if the
tool could accidentally start.
COMPRESSED AIR CAUTIONS
1. COMPRESSED AIR FROM THIS UNIT MAY CONTAIN CARBON MONOX-
IDE.
The air produced is neither suitable for breathing nor food processing
without filtering and testing to all applicable legal standards.
2. AIR ONLY:
Use this compressor for compressing air only. Do not compress
other gases.
3. BREATHING PROTECTION:
Always use a respirator when spraying paint or
chemicals.
4. MAINTAIN TOOLS WITH CARE.
Keep tools clean for better and safer perform
-
ance. Follow instructions for lubricating and changing accessories. Keep dry,
clean and free from oil and grease.
5. NEVER USE THIS EQUIPMENT
if it is leaking air; has missing or damaged
parts, guards, or shields; or requires repair. Make sure all screws and caps are
securely tightened.
6. DO NOT USE THE AIR HOSE
to move the compressor. Release the pressure
in the storage tank before moving.
7. DO NOT ATTEMPT ANY MAINTENANCE OR ADJUSTMENT
with the com
-
pressor in operation, the power connected, or air under pressure in the system.
8. CHECK FOR DAMAGED PARTS.
Make frequent inspections for the correct
function of components and safety mechanism.
9. REPLACEMENT PARTS.
When servicing, use only identical Superior replace
-
ment parts and fasteners recommended by us.
10. EMPLOYERS
must enforce compliance with the safety warnings and all other
instructions in this manual. Keep it available for use by everyone assigned to
use this equipment.
1. TANK SAFETY VALVE:
This valve prevents damage to the air receiver if a
malfunction in the compressor pump occurs. It is factory pre-set at a limit spe
-
cific to your particular model and adjustment. Do not tamper with it. This will
automatically void your warranty.
2. PRESSURE SWITCH:
The air pressure switch is factory pre-set for optimum
performance. Do not bypass or remove this switch. Serious damage to equip
-
ment or personal injury could result from too high an air pressure.
3. MOTOR AND COMPRESSOR PUMP:
Air compressors get hot during opera
-
tion. Do not touch the motor, discharge tubing, or compressor while it is run
-
ning.
The compressor turns itself on automatically while the power is connected.
4. AIR TANK:
Over-pressurizing the air receiver, piping or tank could cause
it to explode or burst. To protect from over-pressurizing, the compressor is
equipped with a factory preset safety valve. Do not remove, make adjustments
to or substitutions for this valve. Perform a test of the valve from time to time:
pull the ring on the valve to make sure that it operates freely. If the valve does
not operate freely, replace it before further use. Never weld to, drill into, or
change the air receiver in any way.
5. TAMPERING:
If any of the components above are found to have been changed
or tampered with, the warranty will be made void. When servicing, we recom
-
mend using only identical Superior replacement parts and any replacement
parts used must have the same specification as the original equipment.
SAFETY PRECAUTIONS SPECIFIC TO COMPRESSOR
