CM208W Series Bi-amp Wiring Schemes
Stand Alone Subwoofer w/rigging points (CM208W shown)
or
Tile Bridge Subwoofer (CM208W-TB)
or
Sheetrock Subwoofer (CM208W-SR)
Speaker Level HF (4 ohm load)
Speaker Level LF (8 ohm load)
Bi-Amp Configuration with Subwoofer & 2 Satellites
(2) 8 ohm Satellites
A 12dB Butterworth LPF set at 100Hz and
a 24dB Butterworth HPF set at 100Hz is
recommended as a starting point.
Subwoofer should have a 12dB Butter-
worth HPF set at 24Hz.
Stand Alone Subwoofer w/rigging points (CM208W shown)
or
Tile Bridge Subwoofer (CM208W-TB)
or
Sheetrock Subwoofer (CM208W-SR)
Speaker Level HF (16 ohm load)
Speaker Level LF (8 ohm load)
Alternate Bi-Amp Configuration with Subwoofer & 2 Satellites
(2) 8 ohm Satellites
Remove lnput Jumpers
A symmetrical 24dB Butterworth crossover
set at 100Hz is recommended as a starting
point.
Subwoofer should have a 12dB Butter-
worth HPF set at 24Hz.
Satellites must be
connected to either
outputs 1&3 or 2&4
Page 5 of 11
