CM208W-SR Installation Guide (cont.)
- Once the sheetrock is finished, use a spiral saw (with a bit that contains a guide) to cut away the sheetrock
from the main center hole. After this, reset the bit and route out the sheetrock from the recess for attaching
the subwoofer.
- Align the subwoofer as shown with the cut-away on the installation ring. Lift the subwoofer through the
ring and rest it on the installation ring with the support piece fastened to the body of the subwoofer.
Support piece
Matched Cut-aways
- Lift up and fix the subwoofer to the installation ring using the six provided fasteners.
- Attach your cables to the input/output plate working through the provided access hole.
- Attach the grill with the (4) provided white screws.
Page 10 of 11
