CM208W Series Wiring Schemes
The following diagrams show the different options available for incorporating the CM208W series subwoof-
ers into your installations. The diagrams show our CM141CC surface mount speaker connected to the
high-pass outputs but any 8 ohm speaker model can be used with the subwoofer. Best results will be
obtained by using SLS satellites however as the internal crossover in the CM208W series subwoofers are
optimized for SLS wall and ceiling speakers.
Stand Alone Subwoofer w/rigging points (CM208W shown)
or
Tile Bridge Subwoofer (CM208W-TB)
or
Sheetrock Subwoofer (CM208W-SR)
Speaker Level Full Range (8 ohm load, 400W Recommended)
Standard Configuration with Subwoofer & 4 Satellites
(4) 8 ohm Satellites
Stand Alone Subwoofer w/rigging points (CM208W shown)
or
Tile Bridge Subwoofer (CM208W-TB)
or
Sheetrock Subwoofer (CM208W-SR)
Speaker Level Full Range (8 ohm load, 400W Recommended)
Configuration with Subwoofer & 2 Satellites
(2) 8 ohm Satellites
Satellites must be
connected to either
outputs 1&3 or 2&4
Page 3 of 11
