SuperiorFireplaces.us.com
127055-01_H
15
IMPORTANT NOTICES - CANADA
IMPORTANT NOTICE
A manufactured shroud which
has been approved by a na-
tional testing agency for use
with this fireplace may be used
if installed in accordance with
the instructions by its manu-
facturer. A locally fabricated
shroud may be used with IHP
Shroud Leg Spacer Kit (SLK)
in accordance with instructions
provided with the shroud.
Canadian code CAN/ULC-S610-M87 and other pertinent
codes require stainless steel chimney for the installation
of this fireplace. A Cold Air Climate Kit is also required
in Canada and is recommended for cooler regions in the
United States. Below, find a list of approved stainless
steel parts.
Chimney Parts List for Canada
Catalog
No.
Model No. 8" Hi-Temp
Wood burning Chimney
F0881
12-8HT
12" Section Hi-Temp Double
Wall Pipe Snap Lock
F0882
18-8HT
18" Section Hi-Temp Double
Wall Pipe Snap Lock
F0883
24-8HT
24" Section Hi-Temp Double
Wall Pipe Snap Lock
F0884
36-8HT
36" Section Hi-Temp Double
Wall Pipe Snap Lock
F0885
48-8HT
48" Section Hi-Temp Double
Wall Pipe Snap Lock
F0886
30E-8HT
30 Degree Hi-Temp Offset
and Return
F0887
12S-8HT
Hi-Temp Chimney Support
(For Use With Chimney
Heights In Excess of 30')
F0888
RT-8HT
Hi-Temp Round Top with
Mesh Screen
F0889
RTT-8HT*
Hi-Temp Round Top with
Mesh Screen and Slip Sec-
tion
F0890
RLT-8HT
Hi-Temp Round Top with
Louvered Screen
F0891
RLTT-8HT* Hi-Temp Round Top with
Louvered Screen and Slip
Section
F0892
ET-8HT*
Hi-Temp Pyramid Top with
Slip Section
F0893
ETL-8HT*
Hi-Temp Large Pyramid Top
with Slip Section (use with all
8" systems)
F0894
AP-8HT
Hi-Temp Anchor Plate/Col-
lar Assembly (for masonry
fireplaces)
F0929
CAK-8
Cold Air Collar Kit - 8"
Chimney
*When ordered alone, this part cannot ship via parcel
delivery services.
NOTICE: The firebox canopy (hood)
must not be modified or replaced with
a canopy that may be provided with
the unvented decorative room heater.
CAUTION: THE STRUCTURAL INTEG-
RITY OF THE MANUFACTURED HOME
FLOOR, WALL, AND CEILING/ROOF
MUST BE MAINTAINED.
WARNING: DO NOT INSTALL
IN SLEEPING ROOM OF MOBILE
HOMES.
