Operation
900948-00E, 07/2020
Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
59
Installing the DRT2000-C 40 Series Log Set
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log placement is
critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the flames. Follow the log placement
instructions precisely.
NOTE:
Do not cover the burner ports.
Table 31 - Log Set
I.D.
No.
Description
1
Front Left Log
2
Front Right Log
3
Back Left Log
4
Back Right Log
5
Twig Log
1.
If necessary, remove the glass door
(
Pages 63-64
)
. Locate the placement tabs
(
Figure 47
)
.
2.
Bend up the log placement tabs
(
Figure 47
)
.
3.
Install the front left log (1)
(
Figure 48
)
.
Figure 47 - Locate the log placement tabs
Figure 48 - Place front left log (1)
4.
Install front right log (2) on two tabs
(
Figure 49
)
.
5.
Install back left log (3) on two tabs
(
Figure 50
)
.
Figure 49 - Place front right log (2)
Figure 50 - Place back left log (3)
Catalog number for the entire set: See
Page 77
.
1
3
5
4
2
1
Top View
Bottom View
Place log (1) on pin (a) first then rotate log until
vertical line in log aligns with screw in floor
1
4
2
3
5
a
b
c
d
e
Pin for
Log #1
Pin for
Log #2
Tab for
Log #2
Tab for
Log #4
Tab for
Log #3
Screw for
Log #1
Screw
1
Fits over Pin “a”
(Figure 47)
2
1
1
2
Top View
Front View
Bottom View
Bottom View
Fits over Pin “c”
(Figure 47)
Fits over Tab “e”
(Figure 47)
Fits over Tab “b”
(Figure 47)
3
