Operation
900948-00E, 07/2020
Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
57
Installing the DRT2000-C 35 Series Log Set
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log placement is
critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the flames. Follow the log placement
instructions precisely.
NOTE:
Do not cover the burner ports.
Table 30 - Log Set
I.D.
No.
Description
1
Front Left Log
2
Front Right Log
3
Back Left Log
4
Back Right Log
5
Twig Log
1.
If necessary, remove the glass door
(
Pages 63-64
)
. Locate the placement tabs
(
Figure 40
)
.
2.
Bend up the log placement tabs
(
Figure 40
)
.
3.
Install the front left log (1)
(
Figure 41
)
.
Figure 40 - Locate the log placement tabs
Figure 41 - Place front left log (1)
4.
Install front right log (2) on two tabs
(
Figure 42
)
.
5.
Install back left log (3) on two tabs
(
Figure 43
)
.
Figure 42 - Place right front log (2)
Figure 43 - Place back left log (3)
Catalog number for the entire set: See
Page 77
.
1
3
5
4
2
1
4
2
3
5
Bottom View
Bottom View
Front View
Top View
Tabs for
Log #1
Tabs for
Log #2
a
b
c
d
e
f
g
Tabs for
Log #3
Tab for
Log #4
1
Top View
Bottom View
Fits over Tab “a”
(Figure 40)
Fits over Tab “b”
(Figure 40)
Do not use
this hole
2
1
Fits over Tab “g”
(Figure 40)
Fits over Tab “f”
(Figure 40)
Fits over Tab “c”
(Figure 40)
Fits over Tab “d”
(Figure 40)
Do not use this hole
1
2
3
Landing for
Twig (5)
Landing for
Twig (5)
