SuperiorFireplaces.us.com
126829-01C
17
INSTALLATION
Continued
PRESSURE TESTING HEATER GAS
CONNECTIONS
1. Open equipment shutoff valve
(see
Fig-
ure 15, Page 16
).
2. Open main gas valve located on or near
gas meter for natural gas or open pro-
pane/LP supply tank valve.
3. Make sure control knob of heater is in the
OFF position.
4. Check all joints from equipment shutoff
valve to gas valve
(see
Figure 16 or 17
).
Apply noncorrosive leak detection fluid to
all joints. Bubbles forming show a leak.
5. Correct all leaks at once.
6. Light heater
(see Operation,
Page 24
depending on your model).
Check all other
internal joints for leaks.
7. Turn off heater (see
To Turn Off Gas to
Appliance
,
Page 25
, depending on your
model).
INSTALLING LOGS
Log Support Brackets
If installing a LBG36SM, attach log support
brackets before installing logs. These brack-
ets are provided with the BG(E)2436 series
burner systems.
1. Install left bracket to left side of chassis
using 2 screws provided
(see
Figure 18
).
2. Install right bracket to right front of chassis
using 2 screws provided
(see
Figure 18
)
.
This bracket will also be used as remote
control bracket if remote is installed.
Figure 18 - Installing Log Support
Brackets
Left Log
Support
Bracket
Chassis
Right Log
Support
Bracket
Right Front of Chassis
INSTALLING SWITCH
A AUTO/OFF/ON switch and wire assembly is
supplied with this burner system. This switch
needs to be used only if remote or wall switch
is not being used. Place the wire assembly
and switch into the switch log. Remove the
jumper wire from the control valve and then
connect the wires to the valve from the switch
assembly as shown in
Figure 19
.
Figure 19 - Connecting Wires
Control Valve
To AUTO
Terminal
on Switch
To OFF Terminal
on Switch
BGE Series Burner System -
Log Compatibility Chart
Burner Sys-
tem Models
Fiber Log
Models
Concrete
Log Models
BGE18NR,
BGE18PR
LBG18SM
LBG18BM
BGE2436NR,
BGE2436PR
LBG24SM
LBG30SM
LBG36SM
LBG24BM
LBG30BM
WARNING: Failure to posi-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically
approved with this heater may
result in property damage or
personal injury.
