Superabrasive
Owner’s manual original language – Lavina
®
LP36GE
1/2022
35
Lifting lever system
Remove the front cover and locate the Zerk grease fittings. Lubricate the Zerk grease fitting with 1-
1 ½ shots of multipurpose grade grease.
10.7 BELT MAINTENANCE
8.7.1 BELT INSPECT
Long life can be expected for this drive assembly as long as the drive belt is kept properly.
We recommend inspecting the belt every 100h for cracks appearing on the sides of the belt and/or in between the
cogs underneath the belt.
10.7.2 REPLACEMENT OF THE DRIVE BELT
In order to mount the belt off do the following steps:
1.
Dismount the tank
form the trowel.
2.
Dismount the tank holder.
3.
Dismount the bearing cap by unscrewing the four bolts.
4.
Dismount the belt cover.
5.
Loosen the bolts that hold the engine plate.
6.
Now the engine is able to move and the belt is loosened.
7.
Take out the belt and replace it.
To mount the belt follow the same steps in reversed order.
Figure 10.6.3
