Superabrasive
Owner’s manual original language – Lavina
®
LP36GE
1/2022
26
Service Alerts
The SA LPG Controller provides equipment-specific service alerts for the following items:
Air Filter
Oil Filter
Spark Plugs
Belt Inspections
Tooling Inspections
Each item has individual alerts at different hour intervals, and the SA LPG Controller will start alerting the user when
the hour interval is over. To reset a particular service alert, simply press the Enter button. The interval starts to blink.
Then press and hold the “+”and the Enter buttons for a couple of seconds. The interval should be reset.
Main Menu Navigation and Use
This section outlines how to navigate the menu and interact with certain features.
Main Menu
The Main Menu contains the following screens, which can be viewed by simply using the “+” and “-” buttons to scroll.
Please note: Upon startup, the first screen shown is always Operational Information (battery’s voltage and tachometer).
-
Operational Information (Default screen)
-
Alarm Status
-
Engine Hours
-
Job Timer
-
Service menu
-
Diagnostic menu
-
Machine number
-
About
Operational Information - This is the default screen. It displays the battery’s voltage and tachometer - current engine
speed in rpm.
Alarm status – Shows if there is an alarm from the MT05 communication of the Kohler engine or from the CO shut-off
module.
Engine Hours – Displays the total number of hours – idle mode and clutch engaged.
Job Timer - The job timer acts as a stopwatch, but only starts when the machine works with clutch engaged. This allows
you to accurately time how long your engine runs for a particular job.
Service menu – When you enter this menu, you have access to the service intervals of the machine. Alarm message
indicates when an interval is over. Then you should take particular action and reset the interval.
Diagnostic menu - When you enter this menu, you have access to the CO shut-off module status and the clutch state
(engaged or not).
Machine number – The machine serial number is entered here from the manufacturer.
About – This screen displays the manufacturer name. Hardware and software version too.
