Superabrasive
Owner’s manual original language – Lavina
®
LP36GE
1/2022
27
LED Alerts & Resetting Service Intervals
The SA LPG Controller will alert you when service is due. To reset the service interval see text above – Service Alerts.
The SA LPG Controller will indicate high levels of Carbon Monoxide. For LED color codes, see CO SHUT-OFF MODULE
specifications, page 22.
The SA LPG Controller will also indicate Kohler engine fault codes. For details, see table below.
Safety Information
Safety Information- Read all safety information before using this device to ensure safe and proper use.
Do not interact with the device while operating your equipment. Doing so may distract your attention and cause an
accident, or may be illegal depending on your region.
Avoid any direct contact with pressure washers, water sprayers or cleaning chemicals of any kind.
Do not drop or cause an impact to the device.
Do not bend or twist the device and/or the wire harness excessively.
Do not disassemble, modify or repair your device. This product contains no user serviceable parts.
FCC Part 15.21
Any changes or modifications to this device that are not expressly approved by the manufacturer may void the user’s
authority to operate the device.
Diagnostic Fault Code Summary
Fault Code Connection or Failure Description Fault Code Connection or Failure Description
0031
Oxygen Sensor Heater Circuit High Voltage
0174
Lean Fuel Condition at High Load
(Open Loop) or Insufficient Fuel Supply.
0032
Oxygen Sensor Heater Circuit Low Voltage
0107
Manifold Absolute Pressure Sensor Circuit Low
Voltage or Open
0201
Injector 1 Circuit Malfunction
0108
Manifold Absolute Pressure Sensor Circuit High
Voltage
0202
Injector 2 Circuit Malfunction
0112
Intake Air Temperature Sensor Circuit
Low Voltage
0230
Fuel Lock-off Circuit Low Voltage or Open
0113
Intake Air Temperature Sensor Circuit
High Voltage or Open
0232
Fuel Lock-off Circuit High Voltage
0117
Coolant/Oil Temperature Sensor Circuit Low
Voltage
0336
Crankshaft Position Sensor Noisy Signal
0118
Coolant/Oil Temperature Sensor Circuit High
Voltage or Open
0337
Crankshaft Position Sensor No Signal
0122
Throttle Position Sensor Circuit
Low Voltage or Open
0351
Cylinder 1 Ignition Coil Malfunction
0123
Throttle Position Sensor Circuit
High Voltage
0352
Cylinder 2 Ignition Coil Malfunction
0131
Oxygen Sensor 1 Circuit Low Voltage,
or Open
0562
System Voltage Low
0132
Oxygen Sensor 1 Circuit High Voltage
0563
System Voltage High
0171
Maximum Adaptation Limit Exceeded
0172
Minimum Adaptation Limit Exceeded
61
End of Code Transmission
