CONFORMITY WITH IEC60601-1 (2
nd
Edition)
"The manufacturer, assembler, installer
or distributor are not considered to
be responsible themselves for the
consequences on the safety, reliability and
characteristics of a device unless the:
•
Assembly, fitting, extensions,
adjustments, modifications or repairs
have been performed by persons
authorized by the party in question.
•
Electrical installation of the
corresponding premises complies with
local electrical codes. (e.g. IEC / NEC).
•
Device is used in accordance with the
instructions for use.
If the replacement parts used for the periodic
servicing by an approved technician do not
comply with the manufacturer’s specifica
-
tions, the manufacturer is not responsible
in the event of an accident.
1. UNPACKING and PACKAGING
The Oxygen Concentrator is packaged
to protect the device from damage while
being transported and stored. Check for
damage to the packaging. After device
is removed from the package inspect for
damage. If damage is detected please
contact your equipment provider. Operat
-
ing environmental condition guidelines
are discussed later in another section of
this User's Guide.
1.1 METHOD FOR WASTE DISPOSAL
All waste from the device (Patient Circut,
Filters, Etc.) must be disposed of using
methods appropriate to the civil authority
of the location where disposed.
2.0 METHOD FOR DISPOSING OF
DEVICE
This device has been supplied by an envi-
ronmentally aware manufacturer. A majority
of the parts in the device are recyclable.
Follow local governing ordinances and recy
-
cling plans regarding disposal of the device
or components normally used in operation.
Any accessories not original to the device
must be disposed of in accordance with
the individual product markings for disposal.
