Super X8SI6-F User Manual Download Page 83

Page: 83 / 113

Chapter 4: AMI BIOS

4-3

System Overview:

The following BIOS information will be displayed:

System Time/System Date

Use this option to change the system time and date. Highlight

System Time

Sys-

tem Date

using the arrow keys. Enter new values through the keyboard. Press the

<Tab> key or the arrow keys to move between fields. The date must be entered in

Day MM/DD/YY format. The time is entered in HH:MM:SS format. (

Note:

The time

is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)
Supermicro X8SIE/X8SIE-F/X8SI6-F/X8SIE-LN4/X8SIE-LN4F
Version
Build Date

Processor

The AMI BIOS will automatically display the status of processor as shown below:
Type of Processor
Speed
Physical Count
Logical Count

System Memory

This displays the size of memory available in the system:
Populated Size
Available Size

Summary of Contents for X8SI6-F


















































































































Search results

Summary of Contents for X8SI6-F

Reviews:

Related manuals for X8SI6-F

Brands by name

Popular brands

Super X8SI6-F, User Manual

Search results

Summary of Contents for X8SI6-F

Reviews:

Related manuals for X8SI6-F

Brands by name

Popular brands