eFlo 2.0 Electronic Flow Meter Operations Manual
Super Systems Inc.
Page 31 of 39
Instrument Configuration
The Instrument Configuration page displays current parameter values and provides the ability
to set, select, and reset values. The parameters are described in more detail below.
Figure 21: Instrument Configuration Web Page
Parameter
Description
Gas Type
Used to set the gas type of the meter
NOTE: changing this
value may limit the amount of flow indicated by the info tag
on the front of the meter
Flow Units
Unit of Flow Rate displayed
Pres. Units
Unit of Pressure displayed
Temp. Units
Unit of Temperature displayed
Sensor Ave.
Increasing this value will increase the average of the flow
rate being displayed on the main screen (range for this
value is 1 to 255)
Max Flow
Sets the 4-20mA analog in and out based on desired max
flow rate allowable
Ctrl Mode
Sets the control mode between flow rate and valve position
Serial
Assigned serial number for this meter.
Alt. Comp.
Sets the altitude for the installed location. Units are feet
above sea level.
Dec. Over.
Forces a meter to show more or less decimal places than
are automatically set.
Ctrl Over.
Assigns the control type for setting the meter’s flow set
point.
Table 6: Parameters and Descriptions for Instrument Configuration