eFlo 2.0 Electronic Flow Meter Operations Manual
Super Systems Inc.
Page 28 of 39
Read/Write Registers (login and password required). This screen displays the register
values of the meter for setup and troubleshooting purposes.
Network Configuration (login and password required). Using this screen, you can adjust
network settings, such as host name and IP address. Note that if DHCP is enabled, the
IP address will be dynamic allowing the network to assign the address.
Main Screen
The main screen (shown above) provides real-time information on the operation of the eFlo unit.
The current gas flow process value and setpoint are displayed, as well as the totalized flow.
Four circular icons on the screen represent the four LEDs on the front of the unit; these icons
will illuminate and darken along with the corresponding LEDs. The Open button willdrive the
motor to open the valve, and the Close button will drive the motor to close the valve.
Instrument Information
The Instrument Information page displays the SSi model number, specific serial number of the
eFlo unit, and the current version of the software.
Figure 18: Instrument Information Web Page