Super Products Camel 1200 (Dump Body), Operator'S Manual

Page: 75 / 158

CONTROL SYSTEM OPERATION
Publication: 0028607 3-3
3
Control System Overview
There are three main control panels available to operate
the Camel™ functions.
1. Cab Control Panel.
2. Front Control Panel.
3. Curbside Control Panel (passenger side of truck).
All control panels and their specific functions are detailed
in the following pages. The power distribution panel is
also detailed.
Emergency stop controls are provided at the front control
panel, curbside control panel, and both wired and
wireless pendant remote controls. The emergency stop
function will disable all system operations but will allow
the engine to operate at idle speed.
Cab Control Panel
The cab control panel consists of a bank of rocker
switches (3) and an alarm (4). This control panel is where
you will begin operating the system by switching into
WORK mode, turning on the work and warning lights,
and monitoring various machine functions.
Figure 3-7
The top and bottom halves of each rocker switch face
have a color-coded light that indicates the status of each
rocker switch.
• Green light indicates the function is on.
• Red light indicates the function is off.
• Blue light indicates that a function is not selectable or
it cannot be operated.
Located above each rocker switch is a label (5) listing the
function of each rocker switch.
NOTE
In road mode an alarm will sound when either the boom
or dump body has not been returned to its travel position.
Cab Control Panel
3
4
5