ASSEMBLY
Following the assembly directions below, you will assemble
the log splitter in a few minutes.
Align the holes and assemble the wheels onto the rear
frame. Secure the connection with bolts, washers and
clips. Attach the caps onto the wheels.
KNOW YOUR MACHINE
Bleed Screw
1. Before operating the log splitter, the Bleed Screw should be loosened by some rotations until air can go in and
out of the oil tank smoothly.
2. Air flow thru the Bleed Screw hole should be detectable during the log splitter is under operations. Before moving
the log splitter, make sure the Bleed Screw is tightened to avoid oil leaking from this point.
Failed to loosen the bleed screw will keep the sealed air in hydraulic system being compressed after being
decompressed. Such continuous air compression and decompression will blow out the seals of the hydraulic
system and cause permant damage to the log splitter.
5
X 2
C
X 2
Switch
Control Lever Guard
Wedge
Pushbutton Box
Motor
Wheels
Log Splitter Stand
Hydraulic Control Lever
Oil Drain Bolt w/ Dipstick
Log Retaining Plates
Log Pusher
Work Table
Bleed Screw
ure Limiting Screw
Max ress
P
Summary of Contents for GUT065
Page 11: ...10 PARTS SCHEDULE...