9
TROUBLE SHOOTING
Problem
Fails to split logs.
The log pusher moves
jerkily, taking unfamiliar
noise or vibrating a lot.
Oil leaks around
cylinder ram or from
other points.
Cause
1. Log is improperly positioned.
2. The sizes or hardness of the log.
Exceeds the capacity of the machine.
3. Wedge cutting edge is blunt.
4. Oil leaks.
5. Unauthorized adjustment was made
on Max. Pressure Limiting Screw.
Lower max pressure rating was set.
Lack of hydraulic oil and excessive air in
the hydraulic system.
1. Air sealed in hydraulic system while
operating.
2. Bleed Screw is not tightened before
moving the log splitter.
3. Oil Drain Bolt with Dipstick is not tight.
4. Hydraulic Control Valve Assembly and
/ or seal(s) worn.
Remedy
1. Refer to “Log Splitter Operation” section
for perfect log loading.
2. Reduce the log sizes before splitting it
on the log splitter.
3. Refer to “Sharpening Wedge” section to
sharpen the cutting edge.
4. Locate leak(s) and contact the us.
Check oil level for possible oil refilling.
1. Loosen Bleed Screw by 3 ~ 4 rotations
before operating the log splitter.
2. Tighten the Bleed Screw up before
moving the log splitter.
3. Tighten the Oil Drain Bolt with Dipstick.
4. Contact us.
WIRING DIAGRAM
PLUMBING DIAGRAM
L
KH
SB
M
C
PE
N
Summary of Contents for GUT065
Page 11: ...10 PARTS SCHEDULE...
