background image

ENVIRONMENTAL

Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should 

be res or ted, taken to the local recycling center and disposed of in an environmentally safe way.

SYMBOLS

The rating plate on your machine may show symbols. These represent important information about the product or 

instructions on its use.

SAFETY

UNDERSTAND YOUR LOG SPLITTER

Read and understand the owner’s manual and labels affixed to the log splitter. Learn its application and limitations 

as well as the specific potential hazards peculiar to it.

DRUGS, ALCOHOL AND MEDICATION

Do not operate the log splitter while under the influence of drugs, alcohol, or any medication that could affect your 

ability to use it properly.

AVOID DANGEROUS CONDITIONS

Fix the log splitter on level ground if it tends to slip, walk or slide.

Keep your work area clean and well lighted.

Cluttered areas invites injuries.

Do not use the log splitter in wet or damp areas or expose it to rain.

Do not use it in areas where fumes from paint, solvents or flammable liquids pose a potential hazard.

INSPECT YOUR LOG SPLITTER

Check your log splitter before turning it on.

Keep guards in place and in working order.

Form a habit of checking to see that keys and adjusting wrenches are removed from tool

area before turning it on. Replace damaged, missing or failed parts before using it.

2

Read these instructions for

use carefully.

Wear eye protection.

Wear hearing protection.

Wear protective gloves.

Wear safety footwear.

It is forbidden to remove or

tamper with the protect ion

devices and safety devices.

Please provide for the proper

disposal of waste oil!

Disconnect the mains plug prior

to the repair, cleaning, and

maintenance of the splitter!

Risk of injury!

Do not reach into the machine

without any protection!

Warning! Clear of moving parts!

Keep children and bystanders off

and away.

Summary of Contents for GUT065













Reviews: