Super Ego 189, Directions For Use Manual, Page: 41 / 144

41
7. OPERATING CONTROLS AND ADJUSTMENTS
F
G
Fig. 18
Elements of Fig. 15 - 18
A: “Half a thread” turned
B: Screw
C: Crank handle removed
D: Opening for the piece to be cut
E: Lathe in contact with the piece
F: Piece to be cut
G: “Half a thread” turned
NOTE
You do not need to turn the screw handle when the
half-nut is in the raised position. The screw handle can
be rapidly pulled out or pushed in.
7.6 BEVELLED CUTTING
The band saw arc can be rotated for bevelled cuts (0° to
45°).
Raise the handle (A) - (Fig. 19) and turn it in the direction
shown to loosen it.
A
Fig. 19
Rotate the band saw arch to the desired angle on the
scale (B) - (Fig. 20). Adjustable stops (C) for 90° and 45°
enable a quick set-up (Fig. 20).
C
C
B
Fig. 20
Elements of Fig. 19 - 20
A: Handle
B: Turning scale of the bevelled angle
C: Adjustable end stops (90º, 45º)