If a conversation with outdoor unit is underway in
monitoring
mode, during this time a visitor
press the call button on either of outdoor unit, the
monitoring
mode will be switched off. the
just visitor s image will appear on its screen and continuous ringing will be heard. you can
press the
T
alk
button to reactivate conversation with the visitor ;for more detailed operations,
please refer to
VISITOR CALL
on page 8.
MONITORING
Press the
monitoring
button on indoor
monitor
Standby mode
Press the
T
alk
button
End
Press the
monitoring
button on indoor
monitor again
display image from 2nd
outdoor camera on the
screen.
Press the
T
alk
button again
monitoring duration
is up to 60
s
econds
Press the
unlock
button to release
the door lock
I
f you are using two outdoor cameras,
but a blank display
appears
when
you activat
e
monitoring mode on either indoor unit,
disconnect
all power supply
to the
indoor unit
, wait 10 seconds, then reapply
power.
Di
splay image from 1st
outdoor camera on the
screen.
Start conversation
with outdoor camera
CALL TRANSFER TO
AN
OTHER EXTENSION
Press this button to access
Call transfer to
other extension
Start conversation
with outdoor camera
If you are using two indoor unit
s
,
activate monitoring mode on
both
indoor
unit
t
o see th
e
same
image
on both
screen
s
.
The image d
isplay
ed depends on
which outdoor unit is being activated from
the
indoor unit
,
or which
monitoring
button
was
pressed last.
When you are transferring a call to other extension, the original
conversation indoor unit will return to standby mode, and the
indoor unit which the call is being transferred will also sound a
continuous Ding Dong tone and the video image will appear on
its screen.
A continuous Ding
Dong tone is
sounded
To release
the
door lock
and
end
the
conversation
,
please refer to page 8.
NOTICE:
Press the
T
alk
button on any of
indoor units
Outdoor camera call indoor
monitor and conversation
is underway
NOTE:
Press this button once
more to return to
standby mode
NOTE:
If you are using only one outdoor camera in
monitoring
mode, you can also end the
monitoring
mode by pressing the
monitoring
button again.
T
The c
onnection of 2 outdoor cameras to 1 indoor monitor is required for dual
entrance
monitoring.
INTERNAL COMMUNICATION
BETWEEN
INDOOR UNIT
S
Press the
T
alk
button on any of
indoor units
Start conversation
among indoor units
Standby mode
Press the
T
alk
button
A continuous Ding
Dong tone is heard
Press the
Ta
lk
button again
End
NOTE:
In
internal communication
mode, if a visitor press
es
the call
button on either outdoor unit, the
internal communication
mode will be switched off.
The
visitor
's
image will appear
on its screen and continuous ringing will be
played
.
Y
ou can
press the
T
alk
button to reactivate
a
conversation with the
visitor
. For
more detailed operations, please refer to
VISITOR
CALL
on page 8.
At least 2 indoor units
are
required
At least 2 indoor units
are
required
11
12