Super Circuits DMR16CD-3, User Manual

Page: 61 / 119

61
1. DDNS ON/OFF
•
Press the ENTER key to turn DDNS ON or
OFF .
2. DNS SERVER
•
Set up DNS Server
’
s IP address. Press the
ENTER key to enter the DNS SERVER . Use
UP and DOWN arrow keys to move
the cursor and [+] [-] or J.Shuttle to
change the value. Press the ENTER key to
confirm the settings and exit the selection.
3. INTERVAL
•
Set up an interval for the DVR to report its
IP address to the DDNS server
automatically. (
D - day / H - hour / M - minute).
Press the ENTER key to enter the selection
and [+] [-] or J.Shuttle to change the values. Press the ENTER key to confirm the
settings and exit the selection.
4. REGISTER
•
Connect to DDNS server and register the DVR information. Press ENTER to start the
registration.
5. DNS STATUS
•
Displays the current status of DDNS connection
IP ADDRESS: Set the server IP address.
IP PORT: Set the server IP port.
REMAIN TIME: Set time for reporting to the server.
6. LAST REGISTRATION DATE
•
Indicate the time of the last registration.
CONNECTION SETUP
Use arrow keys to select and [+] [-] or
J.Shuttle to change the value.
1. TIMEOUT
•
Set up the remote connection response
time. If the client does not receive a
response from the DVR, the client will
disconnect and try again. The setup range is
from 1 millisecond to 12,750 seconds.
2. RETRY COUNT
•
Set up the number of times client should try
to reconnect to the DVR. The setup range is
from 0 to 20.