13
Change the inclination by tightening the 3 webbing (to be more
vertical) or by loosening it (to be more horizontal)
You can increase or decrease the lumbar support by loosening the
4 buckle
Tighten the shoulders’ straps with the 5 webbing
Loosen with the 6 webbing
The support of the shoulders’ straps greatly helps comfort. It should be set
precisely.
Leaning angle setting
Shoulders’ straps adjustment
With the help of the two lateral and under seating buckles, set the
angle of the Speedbag around horizontal position.
Speedbag angle setting
A
B
C
Caution : these settings are only possible under portal
The settings webbings and the chest strap must be IMPERATIVELY put back in-
side the frames. It is STRICTLY forbidden to cut or unstitch the webbings’ends
as they are integral part of the harness rigidity and EN1651 certification adn
consequently to your safety !
1
2
3
4
5
2
1
3
4
5
6
6
