10
A
A
B
B
Placing the parachute in the rescue parachute poc-
ket
Thanks for reading carefully ! We recommend the initial rescue para-
chute installation is made by a qualified person.
A B
C D
Upper
flap
grommets
Under
flap
grommets
1. Place the risers’ straps and the
rigging lines of the parachute
clearly coiled
2. Place the parachute
in its pod on top of the
risers and lines.
3. Take a suitable line and
pass it inside the snapper
on handle’s side.
4. Pull the snapper and
pass it through the B
grommet.
5. Pass the snapper
through the C grommet
and pass the handle’s
cable inside the hole of
the down flap and final-
ly inside the snapper.
Pull away gently the line
6. Place the line through
the other snapper in the
A and D grommets (up
and down flaps). Repeat
step #5.
7. Put the cable trim
inside the flap pocket
8. Turn down the last
flap and place the
handle on its velcro.
When the assem-
bly is complete,
perform a test pull
of the handle to
ensure the compa-
tibility and the cor-
rect deployment of
the rescue (pod +
handle). Then reas-
semble as previous-
ly done.
