Harness User’s manual
S
UP’AIR
_
DELIGHT
2
Page 15
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
Thank you for reading carefully ! We recommend for the initial rescue parachute assembly and installation to be made by a qualified
professional.
Folding and installation of the reserve parachute inside the harness must conform to the specific line guide found in this manual.
Connecting the handle to the rescue parachute’s deployment bag :
D2 rescue parachute handle
Reserve parachute inside its deployment bag and
folded according the manufacturer’s specifications.
Parachute rigging lines
1.
Place the handle inside the middle webbing loop and make a
lark’s head knot with the handle.
2.
Fasten lark’s tightly the head knot and verify the solidity of the link
then check the connection’s integrity.
Rescue parachute pocket characteristics :
• 3 flap reserve parachute back pocket.
• Locked via a double cable system.
• Right sided handle and opening.
• 3 to 9 liter volume capacity.
• Compatible with the SUP’AIR START, LIGHT, X-TRALITE
rescue parachutes and other solo rescue parachutes.
Installing the reserve parachute
B
C
A
B
C
A
Warning: it is possible -depend of your parachute volume - that the
central attachment is not suitable for the handle. If the placement
does not allow the release of the needles when in gantry test so it
is necessary to attach the handle to the lateral fastening POD and
place the POD in the pocket with lateral fastening to the outside.
