Harness User’s manual
S
UP’AIR
_
DELIGHT
2
Page 26
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
After a thorough weather conditions analysis, when the decision to fly has been taken, put your harness on and follow the next steps :
• Fully close the thigh straps, Safe-T-bar and chest strap buckles..
• Close the Speedbag closing buckle to the right side.
• Close the Speedbag closing buckle to the left side.
Pre-Flight control
1
Thigh strap buckles
2
Safe-T-bar / safety strap.
3
Chest strap buckles
• Check that the harness and the carabiners are not damaged..
• Make sure that the reserve parachute safety cables to ride through the closing tabs keeping the reserve rescue pocket flaps
closed.
• Check that your personal settings haven’t changed.
• Check that all zippers and buckles are closed.
• Check that the speedbar is correctly connected and set up.
• Check that no rigging line or other object comes in contact with rescue parachute handle.
• Make sure that the self-locking carabiners are locked and connected to the paraglider.
Chest strap adjustment.
4
5
6
Speedbag left closing buckle.
Speedbag right closing buckle.
Take-off
Flight phases
During takeoff, maintain a standing posture and grab the Speedbag with one of your heels once far enough from the ridge. Using
the foot-rest, push yourself inside the harness.
With help of the foot-rest, push yourself back into the harness.
The Speedbag closes and the Cockpit positions itself automatically.
Do not release your hands from the brakes when you are close to terrain.
