16
ACRO BASE SYSTEM
SUPAIR manufactures its products in Europe. The majority of the components used
come from Europe.
A
B
C
E
D
F
A
A
B
C
E
D
F
I
G
H
I
J
G
1
2
3
4
5
6
7
8
A
H
G
B
B
E
G
F
E
E
H
J
Parachute installation inside the under-seat pocket.
Harness-reserve para-
chute riser flap
Flexible flap.
Left string.
Right string
Lower flap.
Lateral flap.
Handle ( ref : A3 ).
Parachute properly folded
and packed inside its pod.
Additional
reserve
parachute risers.
Harness/reserve pa-
rachute risers.
1. Place the risers har-
ness/reserve ( J ) under-
neath the flap ( A ).
2. Neatly tuck away the
parachute risers ( I ) left
out of the pod ( H )inside
the reserve parachute
pocket.
3. Close the flap ( A ) and
correctly position the
handle ( G ) then, fold the
flexible flap ( B ).
4. Using a packing string,
push the line ( C ) through
the flexible flap left grom-
met ( B ).
5. Using the packing
string, pull the line
through the lower flap left
grommet ( E ) then inside
the handle cable ( G ).
Gently pull the packing
string out.
6. Repeat the procedures
4 and 5 with the right
grommets found on flats
B and E.
7. Connect the handle ( G
) Velcro strip, to the flap (
E ) receiving Velcro strip
( male to female ).Tuck
away the handle extremi-
ties ( G ) in their respective
housing on flap ( E ).
8. Tuck away the flap ( E )
“bumps” in their respec-
tive housing.
Check the completed installa-
tion during a hang-test.
