13
ACRO BASE SYSTEM
SUPAIR manufactures its products in Europe. The majority of the components used
come from Europe.
Installing the bridle connecting the pod to the carabiner.
When connecting the BASE wing to the right Carabiner, be
certain for the bridle not to be twisted.
This side
UP
This side
UP
A
B
C
D
E
1
2
3
A
B
C
D
C
E
Folded BASE wing pod connected to the BASE wing bridles.
Connection bridle to the carabiners ( pre-installed at the fac-
tory : do not take apart ).
Parachute BASE System to harness connection bridles.
Fastening Velcro for the Parachute BASE System to harness
connection bridles.
Self-locking stainless steel ( Inox ) carabiner for the
connection paraglider-harness.
1. Position the pod correctly ( logo
“ This side up” with the arrow poin-
ting upward ). Pull the the connec-
tion bridle out of the pod and place
it over the BASE wing connection
risers. Be certain not to have any
twist and for the bridle not to be
wrapped around the risers.
2. Position the connecting bridle ‘s
Velcro side ( B ) onto the receiving
and corresponding Velcro side ( D
).
3. Be certain not to have the
connecting ( B ) bridle positio-
ned with any twist and not wrap-
ped around the wing to harness
connecting risers ( C ).
Connect the bridle to the right ca-
rabiner ( E ).
Pod BASE System installation.
Caution !
