11
ACRO BASE SYSTEM
SUPAIR manufactures its products in Europe. The majority of the components used
come from Europe.
BUMPAIR assembly
1
2
3
4
Open the lower zipping pocket.
Open the internal pocket zipper.
Push the forth BUMPAIR section forward.
Be certain of its correct positioning after
insertion by sliding your hand between
the wall and the BUMPAIR.
Push the upper section of the BUMPAIR.
Be certain of its correct positioning by
sliding your hand between the wall
and the BUMPAIR.
The BUMPAIR is only installed once. There is no need to take it out of its
container afterward unless in case of a severe impact or water landing
: it would then be necessary to inspect it for possible damage ( tear, rip-
ped fabric or stitching, etc. ).
5
Neatly close the two zips.
3
4
1
2
5
5
