1st digit : Mark mode (green LED)
2nd digit : Standard display / ECO mode disabled /
Reverse display disabled
3rd digit : Key lock mode
FULL / No timer
4th digit : Timer period set at 20 ms
The above represent default settings.
2-level teaching and full-auto teaching possible
External teaching possible
Teaching is possible by external input using the operation panel or
touch panel even for color mark sensors whose position within the
equipment is out of reach. Models can be easily interchanged.
Direct codes enable settings verification at a glance
The settings for the LX-100 series sensors are displayed using a
4-digit direct code. Direct codes enable easy settings verification and
maintenance by phone.
Super simple teaching
Press the ON button at the targeted mark.
We provided an example of the most basic setting method ‘2-level teaching’.
m
For details, refer to p.7 ‘Direct code table’
Direct code display example
The LEDs light up in order and each LED’s reflected
light is checked instantaneously.
The LEDs light up in order and each LED’s reflected
light is checked instantaneously.
Mode selection
Press MODE key and select TEACH mode.
Sensing
Teaching
1
Align the spot on the mark and press the ON key.
2
Align the spot onto the base (non-mark area) and press the OFF key.
m
The
1
2
order can be reversed.
Display showing
complete settings
Mark
Mark mode
1-level teaching possible
Color mode
Spot
Base
Spot
1
2
What is the
direct code?
The direct code is 0004. At present,
the sensor is operating with a mark
at 2300 and base at 860.
Teaching complete. The optimal LED is
automatically selected and the sensor
automatically returns to RUN mode.
•
•
Full-auto teaching: In Mark mode, teaching is effectuated without
stopping the sensing object.
1-level teaching: In Color mode, the color detected is aligned by the
spot and teaching is effectuated.
Other teaching methods
6
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
