LX
-
100
11
At mark mode setting:
Sets the threshold value by
‘2-level teaching’ or ‘full-auto
teaching’.
At color mode setting:
Sets the threshold value by
‘1-level teaching’.
PRECAUTIONS FOR PROPER USE
•
Care must be taken regarding the sensor mounting direction with
respect to the object’s direction of movement.
•
The tightening torque should be 0.8 N
m or less.
Mounting
Part description
Sensing glossy object
Operation indicator
(Orange)
MODE indicator
(Green / Yellow)
MODE indicator (Yellow)
4-digit digital display
(Red)
MODE key
(PRO mode: CANCEL key)
ON key
(PRO mode: SELECT key)
OFF key
(PRO mode: ENTER key)
At mark mode setting:
Allows fine adjustment of the
threshold value.
At color mode setting:
Allows adjustment of sensing
tolerance value.
Adjust
Teaching
TEACH
At mark mode setting:
Indicates the absolute value of light-
receiving amount. It is possible to
indicate the relative value (percent
value) against threshold value.
At color mode setting:
Indicates color consistency
with relative value.
Run
RUN
NAVI mode
PRO mode
Configures operation of the timer.
Timer operation setting
TIMER
Allows various detailed
settings to be configured.
PRO
PRO
Sets mark mode or color mode.
Mark / Color mode setting
COLOR
Sets the sensing level
(hysteresis).
Sensing setting
Sets timer setting period by
9-levels.
Timer period setting
Selects the type of key lock
function.
Key lock setting
Selects display method of
digital display.
Display setting
Sets ON / OFF of ECO mode.
ECO setting
Changes display direction of
digital display.
Display inverting mode setting
Resets to factory setting.
Reset setting
Sensor mounting bracket
MS-LX-1 (Optional)
M4 (length 28 mm
1.102 in
)
screw with washers
Do not make the sensor
detect an object in this
direction because it
may cause unstable
operation.
Mark and base
Mark and base
•
Press the ‘ON key’ when selecting settings. To confirm selected settings, press the
‘OFF key’. The digital display will flash to indicate successful confirmation of settings.
To cancel settings, press the ‘MODE key’.
ADJ
Sensing level: Standard
Sensing level: Coarse
(50 ms)
(500 ms)
(100 ms)
(200 ms)
(20 ms)
(2 ms)
(1 ms)
(5 ms)
(10 ms)
Full lock
Set full key lock
RUN adjust
Set key lock except
for RUN adjust mode
RUN teaching
Set key lock except
for RUN teaching mode
At mark mode setting: Displays light-receiving amount
At color mode setting: Displays color consistency
At mark mode setting: Percentage display with
respect to the threshold value
At color mode setting: Displays color consistency
ECO setting: ON
ECO setting: OFF
Invert the display.
Not invert the display
Reset the settings
Not reset the settings
TABLE FOR PRO MODE SETTINGS
•
This catalog is a guide to select a suitable product. Be sure to read
the instruction manual attached to the product prior to its use.
This product is not a safety sensor. Its use is not
intended or designed to protect life and prevent body
injury or property damage from dangerous parts of
machinery. It is a normal object detection sensor.
•
•
•
Before performing teaching or each detail setting, perform the
setting of either mark mode or color mode with mark / color
mode setting of NAVI mode.
Objects with a glossy surface have a large amount of specular
reflection particles that may destabilize sensing. In such a case,
by slightly tilting the sensor’s beam axis, this specular reflection
can be reduced rendering sensing more stable.
If the surface of the sensing object has a shine,
mount the sensor inclining approx. 10 to 15
degrees against the sensing object.
10 to 15
Press the OFF (ENTER)
key to confirm
Press the OFF (SELECT)
key to move (select)
Press the MODE
key to cancel
Press the OFF
(ENTER) key
to move (enter)
Press the MODE
key to cancel
Press the MODE
key to move
<Correct>
<Incorrect>
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
