background image

RED

GREEN

BLUE

RED

GREEN

BLUE

Various functions to ensure the best mark sensing.
Sensing modes can be selected depending on the application.

Mark mode

Automatic optimal LED selection function

The 3 colors of the R

G

B LEDs are optimally selected according to the color combination. With the LX-100’s Mark mode, the built-in 

‘Automatic optimal LED selection function’ automatically selects the LED for the largest contrast (S / N ratio) between the mark and base (non-
mark area) to ensure optimal sensing. For more stable detection, the sensor makes selection according to the contrast and not according to 
the reflected light variation between the mark and base (non-mark area).

With mark sensing, the larger the received light 
variation is, the easier sensing becomes. Also, the 
higher the received light ratio (contrast) is, the 
more sensing is stabilized. The example on the 
right deals with reflected light on packing film. 
Great figures are indicated for the blue LED’s light 
amount ratio and, for even more stable sensing, the 
blue LED effectuates this mark sensing.
The  LX-100 series sensors automatically selects 
the optimal LED that will ensure the most stable 
sensing results.

Mark

Light amount 

=

ratio

Base

6   :   8

Mark

Light amount 

=

ratio

Base

8   :   4

Mark

Light amount =
ratio

Base

4   :   1

Optimal

Mark

Has a built-in ‘Mark mode’ that realizes a ultra quick 45 

¨

s response time as well as a ‘Color mode’ 

offering the best mark color discrimination capacity. Use either of these modes as per the application.

This sensing mode automatically selects a single 
color from the 3 R

G

B LEDs to realize an ultra 

quick 45 

!

s response time. The automatic optimal 

LED selection function automatically selects the LED 
that is most suitable for the sensing. This function is 
perfect for ultra quick sensing.

Reflectiv

e light

Reflectiv

e light

Reflectiv

e light

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

Automatic selection

3

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Summary of Contents for LP-101-P-Z

















Reviews: