MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 8 of 47
Contact us today:
www.sunwave.com
[email protected]
Operation and Maintenance Terminal
The Operations and Maintenance Terminal (OMT) software runs on all devices in the CrossFire system. WebOMT is the
interface for OMT. WebOMT is based on a web browser and is compatible with most common browsers such as IE and
Google Chrome. WebOMT is customized for CrossFire to query, debug, and configure parameters on devices.
The Master A2 is generally set as the Host of the system. Meanwhile, technicians can access the whole system through
the WebOMT of any device (Master or Slave A2, E2-O and M2RU) connected in the system.
Access to the OMT on the Master A2
In the CrossFire system, the Master A2 is defined as Host. The default IP address of the A2 is https://10.7.3.200.
To set up wired access to the OMT:
1.
Connect a PC to the Master A2 with a network cable in the CONSOLE port on the front panel.
2.
Change the TCP/IP properties (see Figure 5):
a.
Click Network Connections
b.
Click Local Area Connection Properties
c.
Click TCP/IP Properties
d.
Change parameters as indicated:
IP address: 10.7.3.1 (the last number is changeable except for 10.7.3.200)
Subnet mask: 255.0.0.0
Default Gateway: 10.7.3.200 (IP address of Master A2)
3.
Check the status of the Local Area Connection and confirm the connection.
4.
Open a browser window and enter the default gateway in the navigation bar to access the WebOMT page. Figure 6
shows an example using https://10.7.3.200 as the default gateway.
