MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 18 of 47
Contact us today:
www.sunwave.com
[email protected]
SNMP Configuration
The Master A2 generates SNMP traps and delivers them through the CONSOLE Ethernet interface.
The CrossFire system supports SNMP V2 and V3 in this current version.
To configure SNMP settings:
1.
Log in the Master A2 OMT, and go to the SNMP Configuration section.
2.
Go to the IP Settings section and select the SNMP protocol, as shown in Figure 16.
3.
Click Set to save the setting.
4.
Go to the SNMP Configuration section and select the appropriate SNMP Trap Protocol.
SNMP Trap Protocol - The trap protocol to send the SNMP trap.
Figure 17.
SNMP Trap Protocol
5.
Locate the fields and set the appropriate values:
For
SNMP V2
Trap IP Address (1~2): Up to 2 target IP address of SNMP trap receiver.
Trap Port
: The target port of the SNMP trap (default defined port of 162).
For
SNMP V3
(See Figure 17 for details)
Reset USM - USM Reset
Security User Name - Security User Name
Authentication Protocol - Authentication Protocol
Authentication Password - Authentication Password
Privacy Protocol - Privacy Protocol
Privacy Password - Privacy Password
Edit User Confirm - Edit User Confirm
Trap IP Address (1~2) - Up to 2 target IP address of SNMP trap receiver.
