MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 31 of 47
Contact us today:
www.sunwave.com
[email protected]
External Alarm of E2-O
The external alarms are input to a RJ45 interface located on the front panel of E2-O. See Figure 35 for the detailed PIN
configuration of this connector. The external alarms can be monitored as normally closed or normally open.
Use the following steps to view and configure the external alarms.
7.
Log in the E2-O OMT, and go to the Element
Alarms
section.
8.
Select the appropriate alarm level for external alarm in use at the bottom of the page.
9.
Click
Set
to save the settings.
10.
Go to the
Alarm Thresholds
section
11.
Type
External alarm name
and select
Normally closed
or
Normally open
mode.
12.
Click
Set
to save the name.
Figure 35.
RJ45 Pins Description
