SWL2820 Operator’s Manual
53
Never unhitch the bucket or other accessory
when the boom is lifted up.
4.15.1
HITCH THE BUCKET
To engage the bucket or other equipments follow the
steps below:
1)
Rotate the levers to unlock the
coupling pins completely.
2)
Move the machine to align the quick
coupler with the bucket.
3)
Move the machine slowly and
approach the quick coupler to the
bucket till the surface A touches the
surface B (see picture on the right).
4)
Raise the boom and fold the quick
coupler to position the quick coupler
combine well with the bucket. Then
fold the bucket completely.
5)
Stop the engine. Release the residual pressure. Raise the restrain bar.
6)
Get off the machine.
7)
Rotate back the levers to the position
of locking.
8)
Check the coupling pins are properly
positioned in its retainers.
4.15.2
UNHITCH THE BUCKET
To unhitch the bucket or other equipments follow the
steps below:
1)
Move the machine to a level and firm
surface.
2)
Lower the bucket to the ground and
incline forward bucket so that the
bottom side rest on the ground stably.
3)
Stop the engine. Release the residual
pressure. Raise the restrain bar.
4)
Get off the machine.
5)
Rotate the levers to unlock the coupling pins completely.
6)
Get on the machine, start the engine and
release the parking brake.
7)
Move reversely slowly, at the same time,
lower a little the boom and rotate
forward the quick coupler. The quick
coupler topside will leave the upper seat
on the bucket.
B
A
Summary of Contents for SWL 2021 Series
Page 10: ...SWL2820 Operator s Manual 9 Float Tail warning Oil level Diesel Oil Oil filter...
Page 25: ...SWL2820 Operator s Manual 24 3 1 3 MACHINE DISTRIBUTION 1 7 2 3 4 5 6 8 9 10...
Page 45: ...SWL2820 Operator s Manual 44 A B C H G D E F...
Page 89: ...SWL2820 Operator s Manual 88 SWL2820 Hydraulic Diagram...
