SUNWARD SWL 2021 Series, Operator'S Manual

Page: 53 / 91

SWL2820 Operator’s Manual
52

Make sure the lifting equipment have enough capacity to lift the machine

Eyebolts are not supplied by Sunward normally.
The owner of the machine is responsible for
install the eyebolts on the cabin roof.

The eyebolts must be installed properly on the
four installing block on the roof of cabin.
1) Lower the bucket to the ground and
fold it completely.
2) Raise the restrain bar and stop the
engine.
3) Fix the eyebolts to the installing blocks.
4) Insert the cables into the eyebolts and fix them tighten.
5) Connect the cables to the upper lifting ring.
6) Lift the machine slowly and keep the machine balance during whole lifting
progress.
4.15 USE OF THE QUICK COUPLER
The machine is equipped with a quick coupler that makes
easier the engagement with the bucket or other suitable
attachments. This quick coupler is suitable for many
different types of working equipments homologated by
Sunward.
Some precautions for hitch and unhitch the working
equipments:

To hitch or unhitch the bucket, choose a flat
ground and make sure the machine is stable on
the floor.

Before unhitch the bucket, lower the bucket to the ground, putting the bottom side
of the bucket directly to the ground.

Clean, if it is necessary, all the part involved in the operation.

Never hitch the quick coupler when you are in the cabin. The handles could move
and you could result injured or even death.

After hitch the quick coupler and before starting to work check that the pins are
engaged correctly.

Avoid using your hands to align the pins, since you could result injured.

Maintain clean the area located around the mechanism.

Grease the pin every time you hitch the bucket or follow the schedule described in
the item 5.9 Maintenance Plan.

For turning the two handles press the parking brake button and get off the machine.
Never turn the handles of the mechanism while the machine is not blocked with the
parking brake button.