SUNWARD SWL 2021 Series, Operator'S Manual

Page: 37 / 91

SWL2820 Operator’s Manual
36
7) Beacon light switch It is located on the right front panel. It is an ON/OFF switch.
When it is pressed to ON position, the beacon light will be working.
8) Accumulator switch It is to cut off the battery supply circle. Switch off it when it
is necessary.
9) WORKING DEVICE SWITCH For security reasons there is a switch for
blocking the entire working cylinders that control the boom and the bucket. When it
is pushed to OFF position, the boom and bucket can’t be operated. Please push it to
ON position when you need to operate the boom or bucket.
It is suitable for traveling a long distance. When it is to travel a long distance, engage
the switch.
3.8 CABIN
A FOPS and ROPS homologated cabin is equipped on this machine. The cabin is fit for
EN ISO
13510 and EN 13627 level I
safe request. This cabin will supply a comfortable working
environment to the operator and guarantee operator’s safety.
Cabin can be raised by rotate with the base of front joint with chassis .
The rear window is also used as an emergency exit in case of accident. The rear window is
removable. Remove it when it is necessary. For the operation, see the description in ”3.9”.
Remark: The damaged cab could not be repaired and used again.
3.9 REAR WINDOW
Rear window is the emergency exit for operator. In case
of accident, the normal exit is not available any more.
Operator should open the rear window as the follow
procedure and treat it as an emergency exit.
1. Take out the rectangle rubber strip. The
end of the rectangle strip is located closed to
the top left corner of rear window glass.
2. Take out the rear glass and get through
the window.
3.10 SEAT BELT

Change the safety belt when it is damaged or wear
out. The safety bar could not work properly if it is
damaged.

Change the safety belt when you have suffered and
accident.

Check every certain time (See item 5.9 Maintenance
Plan) the screws that support the safety belt.