TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
6
Table 1. Combustibility of construction
materials
Class
А
– non-
combustible
Stone, bricks, ceramic
tiles, baked clay, solutions,
plaster free of organic
additives.
Class
B
– hard
combustible
Gypsum board panels,
basalt fiber needled felt,
fiberglass board, AKUMIN,
Izomin, Rajolit, Lignos,
Velox, Heraklit.
Class С1/С2
Medium
combustible
Wood beech, oak
Wood softwood, layered
wood
Class
C3
– easy
combustible
Asphalt,
cardboard,
cellulose, tar, fiberboard,
cork,
polyurethane,
polyethylene.
For general safety considerations, we
recommend that the boiler be placed
on a foundation with height of 100 mm
made of class A material, see table 1.
2. PRODUCT DESCRIPTION
The BURNiT Pell ECO pellet burner for
hot water boilers is designed to burn
only and exclusively wood pellets and it
is intended to heat up heating boilers.
The built-in control unit and automatic
cleaning function ensure the automated
operation of the burner and optimal
burning of the fuel.
2.1. Design.
The burner is made of high-quality
stainless steel able to withstand
temperatures of up to 1150°С. The
burner must be installed on a heating
boiler.
The burner consists of two parts:
combustion chamber and air jacket.
Longitudinally, under the housing, there
are air jacket, fuel ignition heater, fan and
control unit. On the upper part of the
burner there is a feeder chute to which
the pellet auger is attached. The housing
of the burner has been designed to
meet all regulatory safety requirements
(no sharp or protruding elements) with
operating temperature not exceeding
50°C.
The combustion chamber consists of two
parts:
Ember resistant outer tube and inner
combustion chamber with holes for air
intake along its entire length, opening
for fuel ignition heater and opening for
photosensor.
Between the two parts there is a gap
which provides for free circulation of the
air necessary both for cooling and oxygen
supply into the combustion chamber.
The feeder chute allows 360° rotation
for its best convenient positioning
when connecting the pellet auger to the
hopper.
Diagram 2.
Pellet burner Pell ECO design
• Built-in controller.