Website: www.sunsynk.com E-mail: [email protected]
46
4.20. Advanced Settings for Auxiliary Load
To configure auxiliary load (previously known as smart load) settings click on the “Aux Load” icon.
A nice feature is when the batteries are fully charged and the inverter is still producing energy from the
PV or the turbine it is possible to direct the energy to another load such as a water heater.
Aux Load off Battery % or Voltage Battery level when the Aux load switches off
Aux Load on Battery % or
Voltage
Battery level when the Aux load switches on.
Solar Power
Power limiter to the maximum power allowed to the Aux load.
Gen Input
Tick this box if using a Generator.
Aux Load Output
Tick this box if using an Aux or Smart Load.
For Micro inverter Input
Tick this box if intending to connect a supplementary inverter
or micro inverter (Max. 4kW).
Zero Export
Tick this box to stop exporting power produced by the Aux
Load.
Gen Peak Shaving
Tick this box to use peak power shaving.
What this page displays:
Use of the Gen (Aux) input or output.
What you can do from this page:
Set up a generator input.
Set up an auxiliary (smart) load.
Set up peak power shaving.
Use an additional inverter or micro
inverter.
