SunSun SuperEco JTP Series, Operation Manual

Page: 7 / 8

JTP-4000R-5000R-6000R-7000R-10000R-12000R-14000R
No. Designation No. Designation
1 Filter housing 6 Bearing
2 Control valve 7 Housing
3 Impeller cover 8 Back cover
4 Rotor 9 Base plate
5 O-sealing ring

Fig. 1: Set the flow rate with the help of the control dial.

Fig. 2: Open the filter housing by turning it in the direction of the arrow and then pulling it off.

Fig. 3: Remove the control valve in the direction of the arrow.

Fig. 4: Move the snap lock on the base plate in the direction of the arrow.

Fig. 5: Loosen the base plate.

Fig. 6: Turn the motor housing in the direction of the arrow and remove it.

Fig. 7: Pull the impeller and the pump shaft out of the housing to clean or replace them.

Fig. 8: Make sure that the sealing ring is properly refitted before reassembling the pump.
© by WilTec Wildanger Technik GmbH Item 51634-51645 Page 7
http://www.WilTec.de
http://www.aoyue.eu 05 2021 -1
http://www.teichtip.de