SunSun SuperEco JTP Series Operation Manual Download Page 3

Introduction

Thank you for purchasing this quality product.

 To minimize the risk of injury we urge that our cli-

ents take some basic safety precautions when using this product. Please read this operation
manual carefully and make sure you have understood its content.

Keep this operation manual safe and accessible at all times.

 

CAUTION:

On standing water, garden and swimming ponds and in their vicinity, use of the unit is only permitted 
with a residual current circuit breaker with a tripping rated current of up to 30 mA (according to VDE 
0100 parts 702 and 738).

The unit is not suitable for use in swimming pools, paddling pools of any kind and other bodies of wa-
ter in which people may be present during operation. Operation of the unit while people are in the 
danger zone is not permitted. Consult your electrician!

This appliance is not intended for use by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and/or knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

 ATTENTION:

Perform a visual inspection of the appliance before each use. Do not use the appliance if 
safety devices are damaged or worn. Never override safety devices.

Only use the appliance in accordance with the intended use specified in these instructions for 
use.

You are responsible for safety in the work area.

If the power cord or electrical plug is damaged due to external influences, do not repair the 
cable but replace it with a new one. This work may only be carried out by a qualified electri-
cian.

The voltage of 230 V AC indicated on the unit's rating plate must correspond to the existing 
mains voltage.

Never lift, transport or fasten the unit by the power cord.

Make sure that the electrical plug connections are protected from moisture and flooding.

Always disconnect the plug before working on the unit.

Avoid exposing the unit to a direct jet of water or rain.

The operator is responsible for compliance with local safety and installation regulations. Con-
sult a qualified electrician if necessary.

The user must take suitable measures (e.g. installation of an alarm system, standby pump, 
etc.) to prevent damage caused by flooding of rooms in the event of a malfunction of the unit.

In the event of a failure of the unit, repair work may only be carried out by a qualified electri-
cian.

The unit must never run dry or be operated with the intake line completely closed.

The unit must not be used for operating swimming pools.

The unit must not be installed in the drinking water circuit.

© by WilTec Wildanger Technik GmbH 

Item 51634-51645

Page 3 

http://www.WilTec.de

http://www.aoyue.eu

05 2021

-1

http://www.teichtip.de

Summary of Contents for SuperEco JTP Series









Reviews: